Antminer S19, T19

Antminer S19, T19
HOW TO INSTALL
 

ATTENTION: If you have BITMAIN firmware from March 2024 and older, you need to download the file 2024 UNLOCK  for your control board and read the manual for installing the VNISH firmware.

 

There are several options for installing the firmware. The first option is to install using SD card, the second option is to install without the SD card directly to NAND of the miner using the VNISH TOOLKIT

Standard types of control boards: Xilinx ( SD slot outside ) , beagle bone BB version ( SD slot is located inside on the control board) , Amlogic ( only micro usb slot is located outside ), CVitek ( SD slot outside ), check the file types of control boards

 

SD CARD : Download the SD IMAGE , unzip and read manual ( Use SD card to install the firmware (not more than 16gb, FAT 32) Insert the SD card with VNISH FIRMWARE and turn on the asic, if you pull out the SD card the BITMAIN firmware will return. For amlogic control boards you can pull out an SD card or USB flash drive. If you need to update the version of vnish firmware which you are already using on the SD card or in NAND you need to download the firmware WEB SD update file and use upgrade function in the firmware.

NAND INSTALL: Download NAND INSTALL IMAGE for your miner model and type of contol board and VNISH TOOLKIT ( unzip, read manual how to install ) 

 

After rebooting miner with CVitek control board with vnish firmware, the stock firmware will return, you need to scan the network through the vnish toolkit or use phoenix-scanner in background and the Vnish firmware will be restored automaticaly

 

 

 XILINX 

SD VERSION FOR XILINX 1.2.6-alpha2
S19 SD IMAGE version 1.2.6-alpha2 S19-88 SD IMAGEversion 1.2.6-alpha2 S19-hydro SD IMAGEversion 1.2.6-alpha2 S19j SD IMAGEversion 1.2.6-alpha2 S19jpro plus SD IMAGEversion 1.2.6-alpha2 S19kpro SD IMAGEversion 1.2.6-alpha2 S19jpro SD IMAGEversion 1.2.6-alpha2 S19pro SD IMAGEversion 1.2.6-alpha2 S19pro-a SD IMAGEversion 1.2.6-alpha2 S19A SD IMAGEversion 1.2.6-alpha2 S19A PRO SD IMAGEversion 1.2.6-alpha2 S19i SD IMAGEversion 1.2.6-alpha2 S19j plus SD IMAGEversion 1.2.6-alpha2 S19plus SD IMAGEversion 1.2.6-alpha2 T19 HYDRO SD IMAGEversion 1.2.6-alpha2 T19 SD IMAGEversion 1.2.6-alpha2 S19XP SD IMAGEversion 1.2.6-alpha2 S19XP HYDRO SD IMAGEversion 1.2.6-alpha2 S19 PRO HYDRO SD IMAGEversion 1.2.6-alpha2 S19 PRO PLUS HYDRO SD IMAGEversion 1.2.6-alpha2
SD WEB VERSION FOR XILINX 1.2.6-alpha2
S19 XIL SD WEB IMAGE version 1.2.6-alpha2 S19-88 XIL SD WEB IMAGEversion 1.2.6-alpha2 S19 hydro XIL SD WEB IMAGEversion 1.2.6-alpha2 S19j XIL SD WEB IMAGEversion 1.2.6-alpha2 S19jpro plus XIL SD WEB IMAGEversion 1.2.6-alpha2 S19kpro XIL SD WEB IMAGEversion 1.2.6-alpha2 S19jpro XIL SD WEB IMAGEversion 1.2.6-alpha2 S19pro XIL SD WEB IMAGEversion 1.2.6-alpha2 S19pro-a XIL SD WEB IMAGEversion 1.2.6-alpha2 S19A XIL SD WEB IMAGEversion 1.2.6-alpha2 S19APRO XIL SD WEB IMAGEversion 1.2.6-alpha2 S19i XIL SD WEB IMAGEversion 1.2.6-alpha2 S19j plus XIL SD WEB IMAGEversion 1.2.6-alpha2 S19plus XIL SD WEB IMAGEversion 1.2.6-alpha2 T19 HYDRO XIL SD WEB IMAGEversion 1.2.6-alpha2 T19 XIL SD WEB IMAGEversion 1.2.6-alpha2 S19XP XIL SD WEB IMAGEversion 1.2.0.rc5 S19XP HYDRO XIL SD WEB IMAGEversion 1.2.0.rc5 S19 PRO HYDRO XIL SD WEB IMAGEversion 1.2.6-alpha2 S19 PRO PLUS HYDRO XIL SD WEB IMAGEversion 1.2.6-alpha2
NAND INSTALL VERSION FOR XILINX 1.2.6-alpha2
S19 NAND INSTALL IMAGE version 1.2.6-alpha2 S19-88 NAND INSTALL IMAGEversion 1.2.6-alpha2 S19-hydro NAND INSTALL IMAGEversion 1.2.6-alpha2 S19j NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro plus NAND INSTALL IMAGEversion 1.2.6-alpha2 S19kpro NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro NAND INSTALL IMAGEversion 1.2.6-alpha2 S19pro NAND INSTALL IMAGEversion 1.2.6-alpha2 S19pro-a NAND INSTALL IMAGEversion 1.2.6-alpha2 S19A NAND INSTALL IMAGEversion 1.2.6-alpha2 S19APRO NAND INSTALL IMAGEversion 1.2.6-alpha2 S19i NAND INSTALL IMAGEversion 1.2.6-alpha2 S19j plus NAND INSTALL IMAGEversion 1.2.6-alpha2 S19plus NAND INSTALL IMAGEversion 1.2.6-alpha2 T19 HYDRO NAND INSTALL IMAGEversion 1.2.6-alpha2 T19 NAND INSTALL IMAGEversion 1.2.6-alpha2 S19XP NAND INSTALL IMAGEversion 1.2.6-alpha2 S19XP HYDRO NAND INSTALL IMAGEversion 1.2.6-alpha2 S19 PRO HYDRO NAND INSTALL IMAGEversion 1.2.6-alpha2 S19 PRO PLUS HYDRO NAND INSTALL IMAGEversion 1.2.6-alpha2
NAND WEB VERSION FOR XILINX 1.2.6-alpha2
S19 WEB NAND IMAGE version 1.2.6-alpha2 S19-88 NAND WEB IMAGEversion 1.2.6-alpha2 S19-hydro NAND WEB IMAGEversion 1.2.6-alpha2 S19j WEB NAND IMAGEversion 1.2.6-alpha2 S19jpro plus NAND WEB IMAGEversion 1.2.6-alpha2 S19kpro NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro NAND WEB IMAGEversion 1.2.6-alpha2 S19pro NAND WEB IMAGEversion 1.2.6-alpha2 S19pro-a NAND WEB IMAGEversion 1.2.6-alpha2 S19A WEB NAND IMAGEversion 1.2.6-alpha2 S19APRO NAND WEB IMAGEversion 1.2.6-alpha2 S19i NAND WEB IMAGEversion 1.2.6-alpha2 S19j plus NAND WEB IMAGEversion 1.2.6-alpha2 S19plus NAND WEB IMAGEversion 1.2.6-alpha2 T19 HYDRO NAND WEB IMAGEversion 1.2.6-alpha2 T19 NAND WEB IMAGEversion 1.2.6-alpha2 S19XP NAND WEB IMAGEversion 1.2.6-alpha2 S19XP HYDRO NAND WEB IMAGEversion 1.2.6-alpha2 S19 PRO HYDRO NAND WEB IMAGEversion 1.2.6-alpha2 S19 PRO PLUS HYDRO NAND WEB IMAGEversion 1.2.6-alpha2

 

 BEAGLE BONE (BB)

SD VERSION FOR BEAGLE BONE (BB) 1.2.6-alpha2
S19-88-bb SD IMAGE version 1.2.6-alpha2S19j-bb SD IMAGE version 1.2.6-alpha2S19jpro-bb SD IMAGEversion 1.2.6-alpha2 S19j-plus-bb SD IMAGEversion 1.2.6-alpha2S19jpro-plus-bb SD IMAGEversion 1.2.6-alpha2S19jpro-a-bb SD IMAGEversion 1.2.6-alpha2
SD WEB VERSION FOR BEAGLE BONE (BB) 1.2.6-alpha2
S19-88-bb SD WEB IMAGE version 1.2.6-alpha2S19j-bb SD WEB IMAGE version 1.2.6-alpha2 S19jpro-bb SD WEB IMAGEversion 1.2.6-alpha2 S19j-plus-bb SD WEB IMAGEversion 1.2.6-alpha2 S19jpro-plus-bb SD WEB IMAGEversion 1.2.6-alpha2 S19jpro-a-bb SD WEB IMAGEversion 1.2.6-alpha2
NAND NSTALL VERSION FOR BEAGLE BONE 1.2.6-alpha2
S19-88-bb NAND INSTALL IMAGE version 1.2.6-alpha2S19j-bb NAND INSTALL IMAGE version 1.2.6-alpha2S19jpro-bb NAND INSTALL IMAGEversion 1.2.6-alpha2S19j-plus-bb NAND INSTALL IMAGEversion 1.2.6-alpha2S19jpro-plus-bb NAND INSTALL IMAGEversion 1.2.6-alpha2S19jpro-a-bb NAND INSTALL IMAGEversion 1.2.6-alpha2
NAND WEB VERSION FOR BEAGLE BONE 1.2.6-alpha2
S19-88-bb NAND WEB IMAGE version 1.2.6-alpha2S19j-bb NAND WEB IMAGE version 1.2.6-alpha2S19jpro-bb NAND WEB IMAGEversion 1.2.6-alpha2S19j-plus-bb NAND WEB IMAGEversion 1.2.6-alpha2S19jpro-plus-bb NAND WEB IMAGEversion 1.2.6-alpha2S19jpro-a-bb NAND WEB IMAGEversion 1.2.6-alpha2

 

 AMLOGIC

SD VERSION FOR AMLOGIC 1.2.6-alpha2
S19-88 AML SD IMAGE version 1.2.6-alpha2 S19-126 AML SD IMAGEversion 1.2.6-alpha2 S19j pro AML SD IMAGEversion 1.2.6-alpha2 S19jpro-a AML SD IMAGEversion 1.2.6-alpha2 S19jpro plus AML SD IMAGE version 1.2.6-alpha2 S19pro AML SD IMAGEversion 1.2.6-alpha2 S19j plus AML SD IMAGEversion 1.2.6-alpha2 S19kpro AML SD IMAGEversion 1.2.6-alpha2 S19xp AML SD IMAGEversion 1.2.6-alpha2
SD WEB VERSION FOR AMLOGIC 1.2.6-alpha2
S19-88 AML SD WEB IMAGE version 1.2.6-alpha2 S19-126 AML SD WEB IMAGEversion 1.2.6-alpha2 S19j pro AML SD WEB IMAGEversion 1.2.6-alpha2 S19jpro-a AML SD WEB IMAGEversion 1.2.6-alpha2 S19jpro plus AML SD WEB IMAGE version 1.2.6-alpha2 S19pro AML SD WEB IMAGEversion 1.2.6-alpha2 S19j plus AML SD WEB IMAGEversion 1.2.6-alpha2 S19kpro AML SD WEB IMAGEversion 1.2.6-alpha2 S19xp AML SD WEB IMAGEversion 1.2.6-alpha2
NAND INSTALL VERSION FOR AMLOGIC 1.2.6-alpha2
S19-88 AML NAND INSTALL IMAGE version 1.2.6-alpha2 S19-126 AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19j pro AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro-a AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro plus AML NAND INSTALL IMAGE version 1.2.6-alpha2 S19pro AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19j plus AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19kpro AML NAND INSTALL IMAGEversion 1.2.6-alpha2 S19xp AML NAND INSTALL IMAGEversion 1.2.6-alpha2
NAND WEB VERSION FOR AMLOGIC 1.2.6-alpha2
S19-88 AML NAND WEB IMAGE version 1.2.6-alpha2 S19-126 AML NAND WEB IMAGEversion 1.2.6-alpha2 S19j pro AML NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro-a AML NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro plus AML NAND WEB IMAGE version 1.2.6-alpha2 S19pro AML NAND WEB IMAGEversion 1.2.6-alpha2 S19j plus AML NAND WEB IMAGEversion 1.2.6-alpha2 S19kpro AML NAND WEB IMAGEversion 1.2.6-alpha2 S19xp AML NAND WEB IMAGEversion 1.2.6-alpha2

 

 CVITEK

NAND INSTALL VERSION FOR CVITEK 1.2.6-alpha2
S19-88 CVITEK NAND INSTALL IMAGE version 1.2.6-alpha2 S19-126 CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro-a CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jpro plus CVITEK NAND INSTALL IMAGE version 1.2.6-alpha2 S19pro CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19j CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19jplus CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19kpro CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2 S19xp CVITEK NAND INSTALL IMAGEversion 1.2.6-alpha2
NAND WEB VERSION FOR CVITEK 1.2.6-alpha2
S19-88 CVITEK NAND WEB IMAGE version 1.2.6-alpha2 S19-126 CVITEK NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro CVITEK NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro-a CVITEK NAND WEB IMAGEversion 1.2.6-alpha2 S19jpro plus CVITEK NAND WEB IMAGE version 1.2.6-alpha2 S19pro CVITEK NAND WEB IMAGEversion 1.2.6-alpha2 S19j CVITEK NAND WEB IMAGEversion 1.2.6-alpha2</a S19jplus CVITEK NAND WEB IMAGEversion 1.2.6-alpha2S19kpro CVITEK NAND WEB IMAGEversion 1.2.6-alpha2S19xp CVITEK NAND WEB IMAGEversion 1.2.6-alpha2

 

MODES
POPULAR MODES VNISH FIRMWARE:

S19pro/S19j pro - 125 TH/s - 3800 watt (30 watt - TH/s)
S19pro/S19j pro - 140 TH/s - 4600 watt (33 watt - TH/s)
S19pro/S19j pro - 170 TH/s - 6200 watt (36 watt - TH/s)

S19/S19j - 115 TH/s - 3850 watt (33 watt - TH/s)
S19/S19j - 125 TH/s - 4600 watt (37 watt - TH/s)
S19/S19j - 140 TH/s - 6100 watt (43 watt - TH/s)

T19 - 85 TH/s - 3300 watt (38 watt - TH/s)
T19 - 105 TH/s - 4300watt (40 watt - TH/s
T19 - 120 TH/s - 4900 watt (40 watt - TH/s)

STOCK BITMAIN FIRMWARE:

S19pro - 110 TH/s - 3300 watt (30 watt - TH/s)
S19j - 90 TH/s - 3100 watt (34 watt - TH/s)
T19 - 81 TH/s - 3100 watt (38 watt - TH/s)
 
FIRMWARE CHANGELOGS
 
release 1.2.6-alpha2
 
 
 
New Additions:
  • Added submodel support for Antminer T21(BHB68701-)
  • Added support for submodels BHB68606 and BHB68603P of Antminer S21
  • Dump EEPROM's in case of decoding error

Changes:

  • Changed flag `Resume mining after reboot` now in order to restore mining this item must be enabled
    Implemented quick pause of the miner during initialization
  • Updated miner diagreport
  • Improved work with pools
  • Made UI/UX fixes
  • Minimum speed of coolers during pause reduced to 0% (for known models that can stop at 0 - Nidec)
  • Changed RISE to 85°C and DECREASE temp to 90°C

Fixed:

  • Resolved issue with displaying stock information by chains
  • Fixed error of setting frequencies at low ambient temperature
  • Fixed preset change during decrease to working voltages

API Changes:

  • Added 'has_pics' field in factory-info
 
 
 
release 1.2.5
 
 
New Additions:
  • Added support for Antminer S21 (Amlogic), Antminer S21 Hydro, Antminer T21 (Amlogic/Cvitek), Antminer T19 Hydro, Antminer T21(BHB68703), Antminer S19k Pro (Xilinx), Antminer S19k Pro (BHB56903/BHB56903-/BHB56902-)
  • Added widget Performance
  • Introduced new presets: preset 9250MH for Antminer L7, lower presets for Antminer S19, and new presets for Antminer S19 Hydro, S19Pro Hydro, and S19Pro+ Hydro
  • The dashboard now displays Hashboard factory information and Hashboard temperature after overheating
  • Added features for preheating chips and voltage adjustment in automatic cooling mode
  • Logs are now saved after reboot
  • Invalid CRC EEPROMs are ignored

Changes:

  • Now supports the previous format of autotune.json without serial number (1.2.0/1.2.1)
  • Reduced the minimum difference between switching temperatures to 5 degrees Celsius
  • Recalibrated chip temperature for x21 series
  • Updated water temperature checks on Hydro miners
  • Adjusted chip temp offset for Hydro miners
  • Enhanced autotuning functionality
  • Corrected profiles for Antminer S19i and S19 Hydro
  • Raised the critical temperature threshold to 120°C
  • LEDs now blink faster when activating find miner
  • Made minor UI/UX adjustments
  • Enhanced miner stability

Fixed:

  • Fix for minimum hashrate check when quick start is enabled
  • Fix cooling down for fan auto/manual mode
  • Resolved false virus detection on Cvitek firmware
  • Fixed double compression (diagreport/backup)
  • Corrected /docs route
  • Fixed memory leaks and firmware hangs on Cvitek
  • Resolved configuration loss after power loss
  • Improved autotune for Antminer S19i
  • Fixed chip detection issue on Antminer S19k Pro
  • Resolved double pause issue
  • Fixed dashboard hangs with a large number of connections
  • Fixed voltage adjustment in immersion and manual cooling mode
  • Fixed work with L7 sensors

API Changes:

  • Added max_rpm parameter in the fans object on the /summary response
  • Added hr_stock to the /summary response
  • Introduced new /chains and /factory-info routes on the API
 
 
release 1.2.5 rc2
 
 
Added 
  • Add support of Antminer S21 Hydro
  • Add preset 9250MH for Antminer L7
  • Add new response 'factory-info' in API
  • Add show chain factory info
  • Ignore fans with extra large rpm readings
  • Show chain temp after overheated
  • Ignore invalid eeprom
  • Save logs after reboot

Changed

  • Correct temp sensor position for Antminer S21/T21
  • Correct profiles for Antminer S21/T21
  • Correct presets for Antminer S19 Hydro/S19Pro Hydro
  • Chip temperature recalculation for x21 series
  • Remove 'asic_boost' from settings in API

Fixed

  • Fix for minimum hashrate check when quick start is enabled
  • Fix cooling down for fan auto/manual mode
  • Fix double compression in Safari 
 
 
release 1.2.5-rc1
 
Added 
  • Add support for Antminer S21 (AMLogic)
  • Add support for Antminer T21 (AMLogic/CVitek)
  • Add support for the Antminer S19k Pro submodel (BHB56903-)
  • Add new presets for S19 Hydro and S19 Pro Hydro
  • Display serial numbers and stock hashrates miner on the side panel
  • Implement heatmaps for Antminer S21/T21
  • Include "max_rpm" fan parameter in the fans object on the summary response
  • Introduce new 'chains' route on the API

Changed

  • AUpdate water temperature checks on Hydro miners
  • Adjust preset switcher temperature differentials
  • Improve autotuning functionality
  • Enhance miner stability
  • Make minor UI/UX adjustments

Fixed

  • Fix memory leaks and firmware hangs on CVitek
  • Fix position sensor issues for T19
  • Resolve configuration loss after power loss
  • Correct profiles for Antminer S19i, S19 Hydro
  • Improve autotune issues with S19i
 
 
 
 
release 1.2.5-beta1 
 
Added 
  • Add support x21 series
  • Add support submodel Antminer S19k Pro (BHB56903)
  • Add support Antminer S19k Pro on Xilinx
  • Add show chain serial number and hashrate on logs
  • Add Performance widget: * When you first install firmware - the widget will be right on the dashboard. * For those who update the firmware, for the widget to appear you need to take it out of the list of widgets.

Changed

  • Correction of Antminer S19i profiles
  • Minor changes

Fixed

  • Fixed detect chips on Antminer S19k Pro
  • Fixed double pause when pausing through monitoring
  • Fixed false positives of Microsoft antivirus (CVITEK)
  • Fixed dashboard hangs with large number of connections

 

 

release 1.2.5-alpha5
 
Added 
  • Add support T19 hydro

Changed

  • Raised the critical temperature threshold to 120 C
  • Required restart when disable boards from dashboard
  • Support old format autotune.json without serial number(1.2.0)
  • Leds blink faster when activate find miner

 

 

release 1.2.5-alpha4
 
Added 
  • Add stock hashrate to api request summary
  • Support submodel S19k Pro(BHB56902-)
  • Preheating chips
  • Support miner's on CVitek
  • Voltage adjustment on auto mode

Changed

  • Change chip temp offset on Hydro miners

Fixed

  • Fixed Display of red led when min fan count is configured and immersion mode
  • Fixed voltage adjustment in immersion and manual mode
  • Fixed work with L7 sensors

 

 

release 1.2.1
 
Added
  • Implemented skeletal animation for a smoother loading experience on the main screen.
  • Introduced a DevFee penalty warning within the hashrate widget for increased transparency.
  • Incorporated a silent start and stop mode for the miner, providing a more seamless user experience.
  • Added an option to automatically unpause the miner after a complete reboot, enhancing convenience.
  • Implemented a feature to automatically lower presets in case of errors or overheating, optimizing miner performance.
  • Displayed active pool ping for better monitoring and troubleshooting.
  • Added support for the Farsi language, expanding language accessibility.
  • Provided visibility of non-functioning coolers on the overview screen for improved diagnostics.
  • Introduced automatic voltage adjustment based on temperature for better energy efficiency.
  • Implemented adaptive temperature control, enabling auto-switching presets for optimal performance.
  • Added the ability to change presets without restarting mining, enhancing flexibility.
  • Included a descriptive error message for better understanding and troubleshooting.
  • Added an option to limit the number of miner reboots during error occurrences, preventing excessive disruptions.
  • Introduced downgraded presets specifically for S19 Pro, catering to different user preferences.
  • Included additional presets for S19j Pro and S19 Plus, offering a wider range of options.
  • Extended support for S19 XP Hydro and S19k Pro miners, keeping the software up-to-date with the latest hardware.
  • Implemented a function to ignore non-working temperature sensors for improved reliability.
  • Enhanced API functionality by processing the `devdetails` command on port 4028.

Changed

  • Revamped the mechanism for adding new widgets in the dashboard for a more intuitive experience.
  • Improved settings recovery and backup block for enhanced data security.
  • Enhanced the "Advanced" section with added descriptions of default values for better user understanding.
  • Streamlined the interface by removing support for older miner models (17th series and T2T).
  • Modernized the "Performance" section for improved user experience.
  • Adjusted the model for working with adaptive design, ensuring a cohesive and responsive layout.
  • Reduced auto-tuning operating time by up to 50%, optimizing efficiency. After comparing against our competitors this seems to bring us back to the lead yet again!
  • Improved LED indications for better identification of miner issues.
  • Strengthened the miner cooling function for more effective temperature management.
  • Optimized stability and performance of the miner.
  • Updated the interface and implemented UX improvements for a more polished look.
  • Revolutionized autotune yet again! Redesigned it for "bottom-up tuning," minimizing peak power consumption during tuning.
  • Enabled more options to be changed without restarting mining, providing greater flexibility.
  • Updated the default password for the hotel pool to `x`.
  • Adjusted chip temperature offset for S19, T19 (from 15C to 10C).
  • Set a minimum starting temperature of 10C for hydro miners.
  • Migrated to Vue 3 and updated all modules, utilizing a new project builder (Vite 5).
  • Ability to reset all chain settings with one button click - Allow to use '_' in pool accounts and workers 

Fixed

  • Resolved errors in the device firmware update dialog.
  • Fixed the appearance of the pool widget when reducing its size.
  • Corrected the display size of DevFee for better visibility.
  • Fixed links and display issues in release descriptions.
  • Improved worker name validation in the "Pools" section.
  • Resolved the 404 page issue.
  • Fixed the reset of widgets to default locations.
  • Corrected the dialog for managing customized presets in mobile mode.
  • Addressed auto-filling issues with pools.
  • Fixed blinking problems when adding widgets.
  • Made corrections in working with pools (stratum protocol).
  • Fixed the restoration of the miner config.
  • Addressed chip location issues for S19K Pro.
  • Fixed sensor operation in S19 Pro Hydro, S19 Pro Plus Hydro.
  • Resolved the placement function during miner initialization.
  • Fixed the problem of increased consumption after pausing.
  • Corrected the function of pausing the miner when there is no active pool.

 

 

release 1.2.0-rc4
 
Added 
  • NEW AUTOTUNING - automatic tuning of all chips
  • Remote firmware installation on A113D (amlogic) control boards from micro USB
  • Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND
  • Support for miners Antminer S19J+;
  • Support for miners Antminer S19L
  • Limit on the number of miner reboots in case of problems
  • Presets (set of automatic settings) for S19a Pro;

Changed

  • Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro
  • API speed optimization;

Fixed

  • Working with Nicehash
  • Errors that led to the fall of the miner (error code: 11
  • An error that caused the miner to freeze
  • Improvements in the interface

 

 

release 1.1.12

Added

  • Support for miners S19 (88), S19j Pro A, S19 XP
  • Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings.
  • MAC addresses viewable from the dashboard.
  • The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards.
  • Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit)
  • Widgets are responsive now! 4k? 1080p? 480p? It all looks B-E-A-U-T-I-F-U-L!!!!
  • Voltage compensation based on the temperature and performance of the miner.
  • Voltage checking happens before detecting the chips on the boards. (Important for diagnostics if PSU issue or chip issue)
  • EEPROM support for new miner models (Yes even those weird ones) - Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON ;)
  • General firmware optimization and stability changes added prior to auto-tune release (That’s next)

Changed

  • Work with network settings (DHCP → Static) - Pool Widget - Board Widget - Fonts and their adaptability
  • Expanded optimized interface mode - Location of alerts
  • Display firmware version Location (Bottom right) 

Fixed

  • Fixed an issue that could occur while changing operation of pools by API
  • Operation of Reset/IP Report Buttons for AML Control Boards.
  • Incorrect baud rate setting for 136x chips
  • Inability to generate a diagnostic report
  • Operating mode of the device without hashboards connected to it
  • Firmware error on some BB models
  • Issues with graph ranges not always returning to true value fixed.

 

release 1.1.11

Added

  •  Option to disable interface animations (useful when using AnyDesk or Teamviewer)
  • Quick" settings panel - More convenient configuration of boards, domains, and chips
  • Support for new power supply models - Support for various hashboard modifications
  • Console Debug Mode - for administrators only
  • Support for Antminer S19+
  • Support for Antminer S19i
  • Support for Antminer S19 (with 88 chips)
  • Support for Antminer S19 Pro A
  • Support for Antminer S19j Pro A
  • General firmware optimization 

Changed

  • Improved support for mobile devices
  • Enhanced temperature sensor and chip polling
  • Pause/resume function support extended to all firmware series

Fixed

  • Fixed interface issues when accessed via https://
  • Fixed errors leading to share rejections and decreased hashrate on the pool
  • Fixed errors leading to miner restarts - Other bug fixes...
:
Copyright MAXXmarketing GmbH
JoomShopping Download & Support