Setting up automatic profile switching:
The auto-switching profiles feature is designed to automatically adjust the settings of your mining hardware based on the current cooling conditions.
The feature analyzes the current temperature of the hardware and automatically switches the hashing speed presets to continue mining without overheating.
How to set up:
- Open the Mining tab
- Go to the Performance section
- Select an “overclocking profile” – this profile will be the starting one.
- Activate the Auto Profile Switching function
- Set the profile increase and decrease temperatures, for example:
- Target temperature: 70°C (set in the “Cooling” section)
- Profile increase: 71°C
- Profile decrease: 76°C
- Select the minimum and maximum profiles – the miner will increase and decrease the profile within this range.
- Measurement time – determines how long the system collects and averages metrics before deciding to change the profile. Recommended value is 5 minutes.
- Allowed power overrun – controls the actual power consumption relative to the profile values. If consumption exceeds the set limit, the system automatically lowers the profile. (Prevents electrical network overloads and power supply issues)
- Override top preset – if an error occurs, the system lowers the profile to the last stable one
- Ignore fan speed – if fan speed is above 80%, the profile will not increase even if the temperature allows it. This function allows you to disable fan speed control, and then the auto‑switching function will rely only on temperature.
- Save and apply the settings
