ATTENTION: Firmware is working only with Antminers S19, S19A, S19A pro, S19j, S19jpro, S19pro, T19
Use SD card to install the firmware (not more than 16gb, FAT 32)
Download the SD file for your version of S19 control board, unzip and read manual
if the control board consists of 2 parts and the SD card slot is located inside on the control board then you need to use the BB (beagle bone) version ( check file control board types )
Insert the SD card with VNISH FIRMWARE and turn on the asic, if you pull out the SD card the BITMAIN firmware will return.
If you need to update the version of vnish firmware on the SD card which you are already using you need to download the firmware WEB file and use upgrade function in the firmware.
If during overclock the consumption is higher than 4600 watts, it will be necessary to UPGRADE BITMAIN POWER SUPPLY (check manual how to do it)
- SD VERSION 1.1.9
- S19 SD IMAGE version 1.1.9 S19j SD IMAGEversion 1.1.9 S19j-bb SD IMAGE version 1.1.9 S19jpro SD IMAGEversion 1.1.9 S19jpro-bb SD IMAGEversion 1.1.9 S19pro SD IMAGEversion 1.1.9 S19A SD IMAGEversion 1.1.9 S19A PRO SD IMAGEversion 1.1.9 S19-88 SD IMAGEversion 1.1.9 T19 SD IMAGEversion 1.1.9
- WEB VERSION 1.1.9
- S19 WEB IMAGE version 1.1.9 S19j WEB IMAGEversion 1.1.9 S19j-bb WEB IMAGE version 1.1.9 S19jpro WEB IMAGEversion 1.1.9 S19jpro-WEB SD IMAGEversion 1.1.9 S19pro WEB IMAGEversion 1.1.9 S19A WEB IMAGEversion 1.1.9 S19A PRO WEB IMAGEversion 1.1.9 S19-88 WEB IMAGEversion 1.1.9 T19 WEB IMAGEversion 1.1.9
